products
Would you like to react to this message? Create an account in a few clicks or log in to continue.
products

products and price


You are not connected. Please login or register

How to maintain the intelligent swing gate daily

Go down  Message [Page 1 of 1]

Admin


Admin

<p>1. Maintenance of intelligent swing gate movement</p><p><br></p><p>Swing the brake to cut off the power, open the cover, clean the dust on the surface, spray the transmission part with butter, remove the motor, apply the butter to the gears and wheel grooves, fix the motor at the original position, check whether the connecting screw There is looseness, tightening, the limit switch and the limit metal sheet should not be adjusted casually, the gap of 1-2mm is too far to be sensed, and too close is easy to damage.</p><p><br></p><p>2. Maintenance and maintenance of intelligent<a href="https://www.keyable.com.cn/swing-barrier-gate" rel="noopener noreferrer" target="_blank"> swing gate </a>chassis</p><p><br></p><p>The case of swing gate and wing gate is sprayed or painted with 304 stainless steel and electrolytic plate (A3 plate). The stainless steel case will have rust on the surface after a long time. Use sandpaper and green gauze and fossil powder to clean the case, and the sanded surface will be along the long The texture rubbing (to protect the direction of the thick texture) will in other respects affect the appearance. The mirror-finished surface is polished with polishing wheels and polishing wax, and the conditional surface is coated with anti-rust oil. For the case of spraying and painting, use a soft cloth to wipe off the dust. If the surface is scratched, use the same color paint to make up. Remember not to paint the radio eye area. The gate and wing gate will falsely alarm, causing unnecessary trouble.</p><p><br></p><p>3. Partial maintenance of intelligent swing gate power supply</p><p><br></p><p>Swing the gate to cut off the power, remove the surface dust, check whether each plug is loose, plug it in, tighten it, do not change the wiring position at will, whether the external power supply is exposed, bandage it in time, and if there is leakage, deal with it in time, refer to the manual, check each Whether the technical parameters of the terminal interface are normal, replace the aging electronic components in time.</p>

https://weyes123.666forum.com

Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum