Home
<p><a href="https://www.motorlsdd.com/swing-door-openers" rel="noopener noreferrer" target="_blank"><strong><a href="https://www.motorlsdd.com/swing-door-openers" target="_blank">Swing Door Opener</a></strong></a><strong> </strong>is designed to open and close the sliding gate (translation gate). Be careful before installation, pay attention to the following:</p><p><br></p><p>1. Only allow for use in a well-known state, and must be used in accordance with the product manual to specify safety awareness and dangerous consciousness;</p><p><br></p><p>2, the door cannot be installed on the slope, and there must be a certain safe distance between the door body and other objects;</p><p><br></p><p>3, in order to prevent the influence of winter icing, the running track must be installed in a good drainage;</p><p><br></p><p>4, make sure the door can smoothly slide on the track, otherwise it will lead to the failure of the door or close;</p><p><br></p><p>5. The large opening position and closing position at the door must be installed the limit device, otherwise the door body may be detached from the track in the emergency unlock;</p><p><br></p><p>6, the door must be stable and distorted, that is, the swing, bending or deformation is not allowed when opening or closing;</p><p><br></p><p>7. Translation doorkeloads cannot compensate for the defects of the door itself or the wrong installation of the door body;</p><p><br></p><p>8, make sure the sliding door is installed on a firm foundation;</p><p><br></p><p>9. The output gear of the panning doorway and the walking rack on the door should have a 2-3 mm gap;</p><p><br></p><p>10. Be sure to release any locking devices (such as electronic locks, latches, etc.) on the door before using a panning door.</p><p><br></p><p>11, the cable sleeve must be installed. If the button is controlled by the button, the height of the button installed should be 1.6 m to prevent child malfunction.</p>
products
