Installation method of mechanical seal

<p><strong>Installation method of <a href="https://www.lepuseal.com/" target="_blank">mechanical</a><a href="https://www.lepuseal.com/" target="_blank"> seal</a></strong></p><p>1. Check the seal before installation Whether it is a new <a href="https://www.lepuseal.com/" rel="noopener noreferrer" target="_blank">mechanical</a> seal or a repaired seal, you need to carefully check the following items before installation: check all the parts, the parts must be clean and free of dirt, especially the sealing surface of the dynamic and static ring ; Check the rotating parts of the seal, the drive pin and the spring pin, etc. move freely; check the positioning screws of the rotating parts, the positioning screws should be free and the old ones should be replaced; carefully check the thickness of all auxiliary seals according to the seal installation drawing Appropriate will affect the correct positioning of the seal and the spring load applied to the sealing surface; check that all rotating parts are properly matched with the shaft (or sleeve); check the sealing surface of the dynamic and static rings, there must be no nicks or scratches, any point Minor damage may cause leakage of the sealing surface.</p><p>2. The operation of the <a href="https://www.lepuseal.com/" rel="noopener noreferrer" target="_blank">mechanical seal</a> and the length of its life depend largely on the conditions of the equipment itself. Therefore, when installing the mechanical seal, careful inspection of the equipment will reduce the possibility of seal failure and maintenance costs.</p>