Home
<p>The application fields of optical <a href="https://www.tumtecchina.com/product" target="_blank">fiber</a> <a href="https://www.tumtecchina.com/product" target="_blank">fusion</a> splicers are becoming more and more extensive. Most of the operators of optical fiber fusion splicers have not undergone formal operation training. It is inevitable that errors will occur in the process of use. Today, the following will explain the correct use of optical fibers in detail for everyone. </p><p><br></p><p><strong>How to use the optical fiber </strong><a href="https://www.tumtecchina.com/product" rel="noopener noreferrer" target="_blank"><strong>fusion splicer</strong></a><strong>:</strong></p><p><br></p><p>1. The optical fiber fusion<a href="https://www.tumtecchina.com/product" target="_blank"> splicer </a>confirms that the sliding plate of the blade of the optical fiber cutting machine is at the front end, and the small and large pressure plates are opened;</p><p><br></p><p>2. Strip the fiber coating with a fiber stripper, leave the bare fiber 30-30mm in length, cover the fiber with absorbent cotton or cotton paper dipped in alcohol, and wipe the fiber clean. Wipe with absorbent cotton or cotton paper once, do not wipe with the same absorbent cotton or cotton paper a second time (note: please use alcohol with a purity greater than 99%).</p><p><br></p><p>3. After visually inspecting the edge of the optical fiber coating layer to the appropriate scale on the cutter scale (12-20cm), put the optical fiber into the guide groove of the optical<a href="https://www.tumtecchina.com/product" rel="noopener noreferrer" target="_blank"> fiber</a> cutter with your left hand, and ask the bare fiber to be placed on the left and right rubber pads straight.</p><p><br></p><p>4. Close the small platen and large platen of the fiber cutting machine, and push the slider with the blade on the device to make the blade cut the lower surface of the fiber and slide it freely to the other side to cut the fiber;</p><p><br></p><p>5. Hold the fiber cutter with your left hand, open the large platen with your right hand and remove the fiber debris, and place it in a fixed container.</p><p><br></p><p>6. Hold the fiber with your left hand and open the small platen of the fiber cutter with your right hand. Carefully remove the cut end fiber. Note: The clean fiber section should not touch other objects.</p><p><br></p><p><a href="https://www.tumtecchina.com" rel="noopener noreferrer" target="_blank" style="color: rgb(51, 51, 51);">Tumtec</a><span style="color: rgb(51, 51, 51);"> is one of the most complete kinds of fusion splicer manufacturer and splicing machine supplier.</span></p>
products
