What are the precautions in mechanical seals installation?

<p>What are the precautions in mechanical seals installation?</p><p><br></p><p><a href="https://www.lepuseal.com/" rel="noopener noreferrer" target="_blank"><strong><a href="https://www.lepuseal.com/" target="_blank">Mechanical seal</a></strong> </a>To fully exert its efficiency, there is a strict operational requirement and precautions during installation, which can effectively reach the use of lifting equipment to avoid equipment failure.</p><p>1. When installing, the surface of contact with the sealed phase should be coated with a layer of clean mechanical oil so that it can be installed;</p><p>2, the sealing chamber portion of the device should be cleaned during installation, the sealing parts should be cleaned, keep the sealing end surface intact, prevent impurities and dust from the sealing site;</p><p>3. Before the installation process is strictly forbidden to hit and hit, so as not to make the mechanical seal pay for damage;</p><p>4, the force of the equipment rotation should be ≤0.04 mm, and the axial swift is not allowed to be greater than 0.1 mm;</p><p>5. When installing the static ring cover, tighten the screw must be uniform, ensure the static ring end face and the axial vertical;</p><p>6. Push the ring after installation, can make the ring loop flexible on the shaft and have a certain residual;</p><p>7. After the installation is installed, the rotary shaft is moved, and the rotating shaft should have no generous feel;</p><p>8. The equipment must be filled with a medium before running to prevent dry friction and fail to fail;</p><p>9. When the crystalline, particle medium, the medium temperature&gt; 80 ° C, corresponding flushing, filtration, cooling measures, various auxiliary devices, please refer to the mechanical seal.</p><p>In summary, in the installation of mechanical seals, strictly abide by the above precautions, which can effectively avoid the occurrence of equipment use failures, and can have effective enhancement equipment.</p>