Daily inspection of conveyor belt

<p><span style="color: rgb(136, 136, 136);">When we use the </span><a href="https://www.uliflex.com/product-industrial-belt" rel="noopener noreferrer" target="_blank" style="color: rgb(136, 136, 136);"><a href="https://www.uliflex.com/product-industrial-belt" target="_blank">conveyor equipment</a></a><span style="color: rgb(136, 136, 136);">, we should conduct a visual inspection every day to ensure that the equipment can operate normally, find faults in time, solve the faults, and reduce the loss caused by the faults. Uliflex provides you with the daily inspection content of the <a href="https://www.uliflex.com/pvc-conveyor-belt" target="_blank">conveyor belt</a>!</span></p><p><br></p><p><span style="color: rgb(136, 136, 136);">The inspection content is:</span></p><p><br></p><p><span style="color: rgb(136, 136, 136);">1 Whether there are any abnormalities in the </span><a href="https://www.uliflex.com/pvc-conveyor-belt" rel="noopener noreferrer" target="_blank" style="color: rgb(136, 136, 136);">conveyor belt</a><span style="color: rgb(136, 136, 136);"> and joints.</span></p><p><br></p><p><span style="color: rgb(136, 136, 136);">2 Whether the conveyor belt is damaged by cutting, cracking, piercing and other reasons.</span></p><p><br></p><p><span style="color: rgb(136, 136, 136);">3 Whether there is interlayer peeling damage, especially at the joints.</span></p><p><br></p><p><span style="color: rgb(136, 136, 136);">4 Whether the core body has a broken part.</span></p><p><br></p><p><span style="color: rgb(136, 136, 136);">5 Whether the upper and lower cover rubber is worn out, especially the upper cover rubber, check whether the coal baffle is in contact with the surface of the conveyor belt.</span></p><p><br></p><p><span style="color: rgb(136, 136, 136);">6Whether the conveyor belt has half abrasion.</span></p><p><br></p><p><span style="color: rgb(136, 136, 136);">7 Whether there is wear on both sides of the conveyor belt.</span></p><p><br></p><p><span style="color: rgb(136, 136, 136);">2. Check the wear of the conveyor belt once a week, and the check point should be a certain distance away from the joint.</span></p><p><br></p><p><span style="color: rgb(136, 136, 136);">3. Check the operation status once a week, and the contents of the check are:</span></p><p><br></p><p><span style="color: rgb(136, 136, 136);">1Whether the conveyor belt and the bracket are worn out due to the deviation of the conveyor belt.</span></p><p><br></p><p><span style="color: rgb(136, 136, 136);">2 Whether the material has partial load phenomenon.</span></p><p><br></p><p><span style="color: rgb(136, 136, 136);">3 Whether the conveyor belt sag between the rollers is normal.</span></p><p><br></p><p><span style="color: rgb(136, 136, 136);">4Whether there is a phenomenon that the material on the conveyor belt overflows because the distance between the idlers is too large.</span></p><p><br></p><p><span style="color: rgb(136, 136, 136);">5Whether the conveyor belt is wrinkled and sagging.</span></p><p><br></p><p><span style="color: rgb(136, 136, 136);">6 Whether the conveyor belt is slipping on the driving roller.</span></p><p><br></p><p><span style="color: rgb(136, 136, 136);">4. Determine elongation</span></p><p><br></p><p><span style="color: rgb(136, 136, 136);">At the beginning of operation, check whether the tensioning device is effective every week. After a month, check once a month. Check twice a year after three months of operation. During the inspection, the distance between the standard lines set by the conveyor belt is measured by the tensioning device.</span></p><p><br></p><p><span style="color: rgb(136, 136, 136);">5. Perform visual inspection of the joint once a week</span></p><p><br></p><p><span style="color: rgb(136, 136, 136);">Check whether there are abnormal phenomena such as trauma, bumps, etc. When checking, put the joint part to a position with low tension to check.</span></p><p><br></p><p><span style="color: rgb(136, 136, 136);">6. Check the loading point once a week</span></p><p><br></p><p><span style="color: rgb(136, 136, 136);">Check whether the position of the buffer roller is correct, and whether the gap between the baffle plate and the conveyor belt is proper.</span></p><p><br></p><p><span style="color: rgb(136, 136, 136);">7. Check the cleaning device every two days</span></p><p><br></p><p><span style="color: rgb(136, 136, 136);">Check whether the scraper moves well, and whether the rollers and idlers are stuck with materials.</span></p><p><br></p><p><span style="color: rgb(136, 136, 136);">8. Check the rollers and idlers every two days</span></p><p><br></p><p><span style="color: rgb(136, 136, 136);">Observe whether the bearing is damaged, lack of oil, whether the movement is normal, and replace the worn idler in time</span></p>