How to install the floor standing lamps

<p>1. Preparation before installation</p><p>Before installation, read the installation drawings and the product manual of the <a href="https://www.timingcherish.com/floor-standing-lamps" rel="noopener noreferrer" target="_blank">floor standing lamps</a> carefully, and prepare common tools for lamp installation, such as a flat-head Phillips screwdriver and a hammer. After unpacking the parts, it is best not to confuse them. If there are many similar parts, the installation drawings will generally draw a comparison chart of actual size, and the unused parts are crossed, which is very easy to distinguish the various parts.</p><p><br></p><p>2. Check before installation</p><p>Before installation, check the accessories of the floor standing lamps and other conditions. If you find that the floor standing lamps board is damaged, you can contact the merchant for replacement. Wherever screws, eccentric parts, and wooden shafts are to be installed, guide holes will be opened, so there is no need to worry about the positioning of parts. It should be noted that the wrong parts should not be screwed together repeatedly, otherwise the plate will be easily damaged, and the installation will often cause instability and tilt.</p><p><br></p><p>3. Install the floor standing lamps</p><p>Usually the floor standing lamps should have a cast iron chassis, which is slightly smaller than the surface base. The black plastic cap should be the fastener used to fix the lampshade. The order of parts from bottom to top should be: chassis fastening nut, cast iron chassis, base , Lamp poles, lamp holders, lamp shades, plastic fasteners, light bulbs.</p><p>The power cord coming out of the floor standing lamps pole passes through the fastening nut of the chassis, the cast iron chassis, and the base, and then connects to the power cord and wraps it with electrical tape. The chassis should have a recess to extend the power cord.</p><p><br></p><p>The editor here reminds everyone that the power cord of the floor standing lamps must be handled properly. One is the safety of electricity, and the other is that it is not easy to trip people when walking around in the home.</p><p><br></p>