How to maintain car inspection tools

<p>In order to ensure that your car inspection products will not have too many problems, good maintenance can promote the improvement of work efficiency:</p><p><br></p><p>1: Ensure the dryness of the environmental factors of the car inspection tool: the storage temperature is guaranteed to be between minus 10 degrees Celsius and 60 degrees Celsius; the humidity must be below 60%; the particles cannot exceed 2%.</p><p><br></p><p>2: Basic maintenance of <a href="https://www.ttm-automation.com" rel="noopener noreferrer" target="_blank">automobile inspection jigs</a>: ensure that the exterior of the inspection jig simulation block is clean, and some plugs, detection pins, bottom plates, etc. must be kept clean; place the moving parts that need to be disassembled in corresponding positions.</p><p><br></p><p>3: The maintenance time can be processed in half a year or once a year:</p><p><br></p><p>4: Check whether the bolt hole is worn, and replace it if there is any problem;</p><p><br></p><p>5: Check if there is any looseness in the precision slide, add lubricating oil;</p><p><br></p><p>6: Check whether the positioning reference is worn and rusted, and some may be replaced or polished in time;</p><p><br></p><p>7: Check the marking scale and coating for wear and tear in time.</p>