products
Would you like to react to this message? Create an account in a few clicks or log in to continue.
products

products and price


You are not connected. Please login or register

Solutions to problems in the installation process of wooden door

Go down  Message [Page 1 of 1]

Admin


Admin

<p>After the <a href="https://www.solidwoodendoor.com/" rel="noopener noreferrer" target="_blank">wooden door</a> was installed, it showed a phenomenon of active closure. I don't know why. After inspection by experts, it was found that the measurement results had a greater impact on the quality of the wooden door installation.</p><p><br></p><p>After the measurement, the customized wooden door installation is relatively simple. According to the after-sales manager of a wooden door installation, only the measured hole data is very accurate, and the installation will not have too many problems. Although there are problems, it will also involve the convenience of use, but more It affects the beauty.</p><p><br></p><p>Problem with wooden door installation</p><p>1. Active door switch</p><p>◎Phenomena: Some doors will open or close automatically. Under normal conditions, if the device is in place and the wall is upright, the door can stop in any direction when it is open, and will not open or close automatically.</p><p><br></p><p>◎The crux:</p><p>A. The straight direction of the door is not right;</p><p>B. In the old house, some walls are not standard, and the thickness of the upper and lower walls of the opening will be inconsistent.</p><p><br></p><p>◎Solution:</p><p>When installing, workers can use an infrared level to ensure that all lines of the door are straight.</p><p>When measuring, the thickness of the wall should be measured carefully and leveled in time.</p><p><br></p><p>2. There is a seam between the door line and the wall</p><p>◎Phenomena: After the door cover thread is installed, it does not fit closely with the wall, but shows some gaps.</p><p><br></p><p>◎ Crux: This is related to the thickness of the wall. If the thickness of the two sides and the upper part of the wall of the opening is small, there will be seams.</p><p><br></p><p>◎Solution: It can be coated with white glass glue.</p><p><br></p><p>3. The sliding door remains unchanged</p><p>◎Phenomena: The door gap will be too large in winter, and the wooden door will be difficult to open in humid summer.</p><p><br></p><p>◎ Crux: The wooden door has the nature of swelling and shrinking when wet. If the seam of the door is not kept up to date, this situation will appear.</p><p><br></p><p>◎Solution: Generally speaking, in the longitudinal door seam, the lower seam of the door should be left 8-12 mm, leaving too much light transmission, affecting the sound insulation effect and not beautiful; leaving too little will cause swelling in summer or After the door fell for a long time, it was difficult to open the wooden door. The horizontal door gap should be 5 mm, usually 2 mm on the hinge side and 3 mm on the lock side.</p><p><br></p><p>After the worker’s installation, the owner can check the door seam by himself: close the door, check whether the upper seam of the door is balanced, and whether it is wide on one side and narrow on the other.</p>

https://weyes123.666forum.com

Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum