Home
<p>Both gate valves and ball valves are widely used in flow control applications, but they have important differences.</p><p>In many industries and applications, all types of valves are critical to the operation of machinery and equipment. It is hard to imagine that without a valve, the system will not function. Not all valves have the same function and have different sizes.</p><p><br></p><p>It is important to choose the right valve, so it is important to understand the application, advantages and advantages of each valve.</p><p><br></p><p><strong>Understand the ball valve</strong></p><p>The main difference between ball valves and gate valves lies in the way they are constructed. They work similarly, but have different structures.</p><p><br></p><p>Ball valves are called because they have stems and balls. There is an opening inside the ball. When the valve is open, the opening is aligned with the pipe, allowing free flow. Turn the lever to rotate the ball so that the opening is perpendicular to the flow, closing it.</p><p><br></p><p>The ball valve is also very durable and can work normally even if it is used for a long time. Ball valves are reliable, but they cannot provide precise control. Therefore, ball valves are the best choice when you need to close or start easily without fine-tuning control. This is why many people may refer to these ball valves as "shut-off valves."</p><p><br></p><p>The ball valve is also an ideal choice when the operator needs to open and close the equipment without losing pressure. With the flow of the balls, they are very tightly sealed and easy to operate, just simply rotate the valve handle.</p><p><br></p><p>The price of ball valves is higher than that of gate valves. Another potential disadvantage is that the ball valve requires space to operate. The operator needs to make sure that the ball valve lever can be fully rotated by 90 degrees.</p><p><br></p><p><strong>Understanding gate valve</strong></p><p>Similarly, due to the difference in structure between ball valves and gate valves, the operation of gate valves is different from that of ball valves. They control the flow through a gate, which is lifted from above the fluid or other material. The door can be round or rectangular. The operator usually raises or lowers the gate by turning the knob to control the flow rate to control the valve.</p><p><br></p><p>Gate valves cannot be closed immediately like ball valves. This is one of their main differences. However, gate valves do provide finer control over material flow and material flow pressure. Gate valves will not close immediately, but in applications that require a high degree of control, they are a better choice than ball valves. For example, in the case of high water pressure potential, the gate valve can prevent the formation of water hammer.</p><p><br></p><p>One of the main disadvantages of gate valves is their structure. Because it is opened and closed by a screw handle connected to the gate, failure of the handle may cause major problems-depending on the material of the gate valve and the liquid or material the valve is in contact with, the handle is susceptible to corrosion. Choosing non-corrosive </p><p><br></p><p>If you are looking for professional <a href="https://www.zjxhvalves.com/ball-valve.html" rel="noopener noreferrer" target="_blank"><strong><a href="https://www.zjxhvalves.com/ball-valve.html" target="_blank">ball valve manufacturers</a></strong></a>, Xinhong Valve ball valve manufacturers are good choice for you. Xinhong Valve is China ball valve manufacturers specializing in high-quality Ball Valve, Gate Valve, Check Valve, Globe Valve and Y-Strainer.</p>
products
