Home
<p>It is essential to protect <a href="https://www.lyfilter.com/high-flow-filter-cartridge" rel="noopener noreferrer" target="_blank"><a href="https://www.lyfilter.com/high-flow-filter-cartridge" target="_blank">high-flow water filter cartridges</a></a> in daily use. Its protection and disinfection are crucial for its continued use.</p><p><br></p><p>Protection method for large flow water filter element</p><p><br></p><p>If the large-flow filter element of the water supply does not meet the flow rate planned, you can open the filter and remove it from it. Next, soak the filter in 4% Hydrochloric Acid for 24 hours and then in 4%. Finally, soak the filter in sodium hydroxide for 24hrs. Then, rinse the tap.</p><p><br></p><p>Verify that the O-ring has not been damaged. If the O-ring is damaged, replace it first. Next, install the large flow water filter element using the method of large-flow filter element device. Finally, flush the unit under less than 0.1Mpa.</p><p><br></p><p>If the high flow water filter element has to be turned off for a prolonged time, please remove it, wash it using the above method, dry it, and then turn it on again.</p><p>Large flow water filter element must be drained.</p><p><br></p><p>Steam disinfection is recommended before you use the high-flow water filter. There are two methods of disinfection available: on-line and inside the steam disinfection cabinets.</p><p><br></p><p>1 Disinfection in a disinfection cabinet</p><p>The high-flow water filter element should be removed from the plastic bag. Place it in the disinfection cupboard at 121°C for half an hour.</p><p>2Online disinfection:</p><p><br></p><p>The large-flow<a href="https://www.lyfilter.com/products" rel="noopener noreferrer" target="_blank"> <a href="https://www.lyfilter.com/products" target="_blank">water filter elements</a></a> should be installed in the filter following the instructions.</p><p><br></p><p>Installation of large flow water filter elements:</p><p><br></p><p>1. Place the high-flow water filter unit straight into the O-ring.</p><p>2. Do not squeeze the high-flow water filter too tight.</p><p>3. Do not touch the high-flow water filter with your fingers.</p><p>4. Before using the high-flow water filter, flush it as often as you can.</p><p><br></p><p><a href="https://www.lyfilter.com/" rel="noopener noreferrer" target="_blank">Guangzhou Lvyuan Water Purification Equipment Co., Ltd. </a>specializes in the production of various filter elements, welcome to consult!</p>
products
