How to judge the pros and cons of sanitary ware

<p>How to judge the pros and cons of <a href="https://www.appollobath.com/" target="_blank">sanitary ware</a></p><p><br></p><p>One is the green body: the quality of the green body directly determines the water permeability of the ceramic. At present, the firing process of ceramics has been greatly improved. Most brands, including some low-end brands, use high-temperature pottery fired above 800 degrees. In the early years, the ceramic sanitary ware that became yellow after three or two years has become a mess. Rarely, there is no big problem with using a toilet of four or five hundred for three to five years. But for the same high-temperature pottery, the difference in grade is also very obvious. The length of the "high-temperature tunnel kiln" directly determines the texture of the ceramic. The longer the tunnel, the longer the ceramic will take from heating to cooling, and the temperature change during the firing process is small. It is not easy to crack, and has good resistance to rapid cold and heat; the "high-temperature tunnel kiln" is short, and the process from high temperature to cold feeling is short, and the texture of the fired ceramics is relatively brittle and easy to crack. The cost of high-temperature tunnels is very high, with an average cost of nearly 150,000 yuan per meter. Therefore, some small-scale manufacturers cool directly outside the kiln, and the difference in quality is even greater. In addition, only the kiln is large enough to burn the high water tank, which saves water and washes more cleanly.</p><p><br></p><p>The second is to look at the glaze: the brand of the glaze, the thickness of the glaze layer, and the firing process directly determine the effect of the glaze of the sanitary ware. The imported glaze is used. The surface of the sanitary ware with thick glaze is smooth and delicate, the texture is full, and the crystal is clear. It's very comfortable to go up. Moreover, it has strong self-cleaning ability and low water permeability. The downpipe and the inner wall of the water tank of medium and high-end sanitary ware are also glazed, which is very important to prevent the toilet from getting dirty, but this kind of process is very difficult, and domestic brands seldom can do it. Whether the downpipe is glazed or not An important mark for judging the grade of sanitary ware.</p><p><br></p><p>The third is to look at the accessories: the traditional copper water fittings and floating ball irrigation have been eliminated. The current good water fittings are all imported PVC materials and vacuum irrigation technology, and the anti-corrosion, rust-proof performance and leak-proof performance have been greatly improved. The water fittings of brand-name sanitary ware are supplied by professional manufacturers. Looking at the overall shape, good sanitary ware must not only have a beautiful appearance, but also conform to human functions and be comfortable to use. The manufacturer's molds, equipment and design capabilities are the deciding factors. High-level manufacturers generally use imported molds.</p>