Precautions for rapid prototyping of injection molded parts

<p>In the rapid prototyping process of <a href="https://www.dankemold.com/plastic-injection-molding" rel="noopener noreferrer" target="_blank">plastic injection molding</a>&nbsp;parts, the injection molding machine works quickly under the conditions of strong, high speed, high temperature and high pressure. Its injection mechanism is a high pressure, high speed and local high-temperature machine, which has a certain degree of danger, so it is working, I need to remind all colleagues to pay attention to the following dangerous areas:</p><p><br></p><p>(1) Feeding area-the high-temperature screw is in a rotating state, so do not put iron rods or other foreign objects into it.</p><p>(2) Material pipe area-this area is the material heating area, which is easy to burn due to high temperature.</p><p>(3) Nozzle area-the place where the rubber is the high-pressure injection, there is a danger of splashing or scalding.</p><p>(4) Mold area----This is a high-speed and high-voltage switch action area, which is quite dangerous. Raw materials may also be sprayed from the mold clamping surface, so special care is required.</p><p>(5) Die support area-powerful mechanical action, but also need special attention.</p><p>(6) Clamping mechanism-high-speed and powerful mechanical action.</p><p><br></p><p>The above six points are all precautions for the rapid prototyping of injection molded parts. Special attention and precautions should be taken during the injection molding process to avoid minefields and pay attention to safe production.</p><p><br></p>