Home
<p>How to add copier toner? Why is there this problem? Because the original toner of the copier is relatively expensive, some users will choose to buy the bulk toner to add it by themselves after using up the toner. Although this practice is not very recommended, because the toner of the copier The particles are too small, and its constituents will still damage the health of the human body, but if you must add it by yourself, we can only remind everyone here, when you add the <a href="https://www.ascendimage.com/printer-and-copier-toner" rel="noopener noreferrer" target="_blank">copier toner</a>, you should try to protect it. For yourself, take protective measures, and provide some matters and steps to pay attention to when adding toner!</p><p><br></p><p>1. Remove the copier cover</p><p>Photocopiers generally have a cover underneath. After removing the cover, you will see a toner cartridge with a long handle (there is a plastic snap on the handle).</p><p><br></p><p>2. Pull out the toner cartridge</p><p>The toner cartridge can be pulled out by rotating it to the proper position according to the instructions (LOCK/UNLOCK) next to the copier.</p><p><br></p><p>3. Clean up the remaining toner</p><p>Before adding toner, it is best to use the copier toner cleaner to clean the remaining toner in the developing compartment and clean the toner cartridge containing the toner.</p><p><br></p><p>4.Add toner</p><p>Try to use the same brand of toner when adding toner, otherwise the copying effect will sometimes be affected. Fill the toner cartridge with toner and shake it well.</p>
products
