<p><a href="https://www.jiataibaoshelf.com/warehouse-shelves" rel="noopener noreferrer" target="_blank">Warehouse shelving racks</a> are usually produced according to purchase orders without a large number of stocks, and warehouse shelving racks are composed of multiple components and need to be assembled on site. For enterprises, purchasing warehouse shelving racks is a big project, which involves preliminary design, mid-term supervision and late acceptance. Among them, the pre-installation acceptance of warehouse shelving racks is also an important link. Here is a brief introduction to the three details of the pre-installation acceptance of warehouse shelving racks.</p><p><br></p><p>Check whether the column and beam are bent or deformed</p><p>Columns and beams are two important components of warehouse shelving racks. They are long and need to be transported to the site by logistics vehicles. If the packaging is not rigorous, it is likely to be bent or deformed or surface damaged. Pay attention to it during acceptance.</p><p><br></p><p>Check the surface welds for defects</p><p>Welding seams on the surface of warehouse shelving racks test the production capacity of the shelf manufacturers. They must be uniform, and there must be no defects such as cracks, slag inclusions, weld bumps, burn-through, arc pits, and needle-like pores. Careful observation must be made during acceptance.</p><p><br></p><p>The surface of warehouse shelving racks is not only for beauty, but also for good protection. It is easy to see if the surface is not treated well. Some can also be tapped with a hammer to see if there is any falling off (must not be too hard).</p><p><br></p><p>Once you have mastered these three details, you won't be clueless during acceptance.</p>
products