LCD and its module interface form

<p>LCD interface form:</p><p>The interface modes of <a href="https://www.genyulcm.com/products" rel="noopener noreferrer" target="_blank">LCD module</a> is generally divided into conductive adhesive strip crimping type, metal pin type, and zebra paper crimping type. The metal pin type means that the lead-out line of the LCD is made of metal pins. It is sufficient to solder the metal lead of the LCD to the circuit board during use; the conductive adhesive strip crimping means that the lead-out pin of the LCD is made of ITO glass. When in use, it is necessary to use a conductive adhesive strip to connect the lead glass of the LCD with the circuit board through external structural pressure. Zebra paper crimping means that the lead wire of the LCD is zebra paper, and the zebra paper needs to be crimped onto the circuit board with a heat press when in use.</p><p><br></p><p>The interface form of the module:</p><p>The interface form of the module is generally divided into pin type, jack type, cable interface and so on. The socket type means that the interface of the module is a row of sockets, and the user can use the pins to solder to the socket when using; the pin type means that the interface of the module is a row of pins. Just solder it to the circuit board; Cable interface means that the interface of the module is a cable line, and the user can insert or solder the cable line to the circuit board.</p>