Home
<p>Aluminum honeycomb panel is a curtain wall aluminum veneer and aluminum veneer decoration material that has appeared in recent years. Its color is changeable and beautiful, with obvious sound insulation and thermal insulation effects, energy saving and environmental protection. Therefore, consumers are very popular, and some large conference rooms, exhibition venues, public malls, etc. often use aluminum honeycomb panels. </p><p><br></p><p>However, its installation is a science. </p><p><br></p><p>1. The surface of the honeycomb aluminum plate is uneven, and the joints are not washed. (1) The connecting corner line is not securely fixed and is shifted. (2) The connection cable is not directly installed. (3) The surface of the honeycomb aluminum veneer itself is uneven. 2. Sealant ruptures, causing gas penetration or rain water leakage. (1) The injection area is not clean. (2) The seam is too deep and glued on three sides. (3) The adhesive is contaminated or damaged by dust before it is fully bonded. (4) The straightness error of the keel and the attachment is too large, and the gap between the plates is unreasonable. </p><p><br></p><p>2, <a href="https://www.canyimetal.net/aluminum-honeycomb-plate" rel="noopener noreferrer" target="_blank">aluminum honeycomb panel manufacturers</a> installation and processing methods (1) Thoroughly clean the gap between the drying plate (especially the adhesive surface). (2) Fill the deep bonding joint with PVC bonding material (small round rod), make the two sides foam, and ensure the depth of the joint. (3) Make sure that the bottom slot of the cover is installed correctly, and adjust the clearance of the honeycomb aluminum plate on both sides of the cover. (4) Handle carefully after injection until it is safe and secure. (5) To ensure the tightness of the connecting parts, the position is open when the chip is fixed, strictly check the quality of the honeycomb aluminum plate in front of the top plate, and compare the product number provided by the supplier with the aluminum veneer installation drawing.</p>
products
