How to remove the marks left by the package sealing tape?

<p>I believe that everyone will have such troubles when using <a href="https://www.yitape.com/masking-tape" target="_blank">package sealing tape</a>: After the package sealing tape&nbsp;stuck on the surface of the table, glass or cup is torn off, it will leave a sticky mark that is difficult to remove, affecting the appearance. A layer of dust is attached, which is also very unhygienic. Here is a small trick that the editor of Yichang <a href="https://www.yitape.com/masking-tape" rel="noopener noreferrer" target="_blank"><strong>package sealing tape</strong></a>&nbsp;supplier personally tried can solve this problem.</p><p>1. Medical alcohol soaked offset printing</p><p>Drop some medical alcohol on the surface of the trace, soak it for a while, and then wipe it off with a soft cloth or paper towel. Of course, the items with traces of package sealing tape&nbsp;must not be afraid of alcohol corrosion. Similarly, if you have expired perfume or astringent lotion, you can also use alcohol instead, because there is a certain amount of alcohol in it (reference: what is the use of expired or unsuitable skin care products and cosmetics), and These two can be applied to any item, after all, the alcohol content inside will not be too much.</p><p>Scope of application: the surface of items that are not easily corroded.</p><p>2. Heater offset printing</p><p>Turn on the hair dryer to the maximum heat, blow the package sealing tape&nbsp;traces for a while, let it slowly soften, and then wipe it off with a harder eraser or a soft rag.</p><p>Scope of application: Applicable to items with small traces of package sealing tape&nbsp;and long-term offset printing, but the items must have sufficient heat resistance.</p><p>3. Computer cleaner erases offset</p><p>The cleaners commonly used to wipe the camera lens and computer screen can also be used to wipe the package sealing tape&nbsp;traces.</p><p>Scope of application: It is very effective for package sealing tape&nbsp;printing on the surface of smooth items.</p><p>4. Eraser erases offset</p><p>&nbsp;When I was a child, I often used this method to wipe it with an eraser. The rubber scraps could just stick the traces of glue.</p><p>Scope of application: It is used for small areas and newly left traces. For large areas of package sealing tape&nbsp;traces, it is futile.</p><p>5. Nail Polish removes offset printing</p><p>This is the most effective method I have ever used and it has been used all the time. No matter how long the "history" and the area of ​​offset printing are, drop some nail polish remover for girls to clean nail polish, soak it for a while, and then wipe it with paper towels to ensure that the surface of the items is as clean as new.</p><p>But there is a problem, because the nail polish remover is very corrosive, it can not be used on the surface of items that are afraid of corrosion, such as lacquered furniture, laptop shells, etc. However, the lacquer surface of the notebook shell was greatly damaged, and some nail polish remover flowed into the inner shell of the computer, which caused the inner shell to be corroded.) Therefore, although the nail polish remover removes traces of package sealing tape, it is necessary to pay attention to protecting the items left with traces from corrosion.</p><p>Scope of application: Offset printing has a long time, large area, difficult to clean, and is not easily corroded.</p><p>6. The time-saving and energy-saving "adhesive remover", also known as "adhesive remover", is sold in some auto parts stores. After spraying the traces, it can be wiped off quickly.</p><p>Scope of application: Large-area hard-to-remove offset printing, but if you usually do not often encounter the problem of package sealing tape&nbsp;marks, you don’t need to buy a bottle specially, just use the author’s small trick.</p>