Home
<p>Glass cutting machine for glass carving machine it is mainly used in a variety of ultra-thin glass fine processing, special-shaped cutting, technology has been very mature, many people also want to know the processing principle of <a href="https://www.enkongmachinery.com/products" target="_blank">glass cutting machine</a>. Enkong glass machine manufacturer will explain the specific processing principle of glass cutting machine.</p><p><br></p><p>Processing principle of glass cutting machine:</p><p><br></p><p>1, the fine carving machine processing glass tool generally USES the diamond grinding head, with 24000~40000 rotation of the spindle high-speed rotation, processing is actually grinding rather than cutting. With special grinding head.</p><p><br></p><p>2, can achieve the ultra-thin glass holes, grooves, up and down one-time chamfering, precise cutting of glass, shape processing, chamfering, error can be controlled in ±0.02~±0.05mm, and the glass edge is not easy to collapse, damage. According to the design of good jig, to achieve continuous mass production of products.</p><p><br></p><p>Processing scope of glass cutting machine:</p><p><br></p><p>1. The glass thickness of the touch screen is generally 0.55mm, 0.7mm, 0.9mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm, especially the glass thickness below 1.0mm is more widely used.</p><p><br></p><p>2. Shape and size: circle diameter 10mm~400mm. Abnormity 500x400mm. Thickness 0.3mm~10mm.</p><p><br></p><p>Maintenance of glass cutting machine</p><p><br></p><p>1. Make sure the laser tube is filled with circulating water before the machine works:</p><p><br></p><p>The glass cutter automatically flows into the water tank, opens the water tank, takes out the water pump, and removes the dirt from the water pump. Clean the water tank, replace the circulating water, return the water pump to the water tank, insert the water pipe connecting the water pump into the water inlet, and tidy up the joints. Power the pump separately and run for 2-3 minutes (fill the laser tube with circulating water).</p><p><br></p><p>2. Fan cleaning:</p><p><br></p><p>The use of the fan for a long time, will make the fan inside the accumulation of a lot of solid dust, so that the fan produces a lot of noise, is not conducive to exhaust and flavor. When the fan suction is not enough to exhaust smoke, first turn off the power, the fan into the duct and the duct removed, remove the dust inside, and then the fan upside down, and pull the blades inside, until clean, and then the fan installed.</p><p><br></p><p>Glass cutting machine</p><p><br></p><p>3. Clean the lens (it is recommended to clean the lens before work every day, and the equipment must be in the state of shutdown). No. 3 lens and focusing lens need to be removed from the lens frame, wipe with the same method, after the completion of wiping the original can be put back.</p><p><br></p><p>Note:</p><p><br></p><p>1) the lens should be gently wiped, do not damage the surface coating film (metal wood coating film lens is more durable).</p><p><br></p><p>2) the wiping process should be handled gently to prevent falling.</p><p><br></p><p>3) when the focusing mirror is installed, be sure to keep the concave face downward.</p><p><br></p><p>4. Guide rail cleaning (recommended cleaning frequency cycle: half a month, shutdown operation) guide rail, straight axis as one of the core components of the equipment, its function is to guide and support. In order to keep the machine with high processing accuracy, it is required that the guide rail and straight line have high guiding precision and good processing quality of the glass cutting machine.</p>
products
