Home
<p>Auto Led Head<a href="https://www.lanxinautolight.com/product" target="_blank">light</a> refers to a car light using LED (light emitting diode) as the light source. Because LEDs have the characteristics of high brightness, rich colors, low power consumption and long life, LEDs are widely used in the automotive field.</p><p>Common exterior lights are: headlights, fog lights, license plate lights, reversing lights, brake lights, turn signals, position lights, profile lights, parking lights and warning lights and daytime running lights. The light color of external lamps is generally white, orange and red; vehicles that perform special tasks, such as fire trucks, police cars, ambulances and emergency repair vehicles, use red, yellow or blue flashing warning <a href="https://www.lanxinautolight.com/product" rel="noopener noreferrer" target="_blank">lights</a> with priority to pass. Motor vehicles should participate in safety testing and comprehensive testing on time to ensure that the external lighting is complete and effective.</p><p>(1) Headlamps, commonly known as "headlights", are instal<a href="https://www.lanxinautolight.com/product" target="_blank">led</a> on both sides of the head of the car and are used to illuminate the road in front of the car. There are two-lamp system and four-lamp system. When the four-lamp headlamps are installed side by side, the corresponding one on the outside is a near-beam and high-beam dual-beam lamp; the one on the inside is a high-beam single-beam lamp. High beam lights are generally 40-60W, low beam lights are generally 35-55W.</p><p>(2) The fog lights are installed at the head or tail of the car. It is used to improve the lighting of the road in front of the vehicle in fog, snow, heavy rain, or dust. The power of the <a href="https://www.lanxinautolight.com/product" rel="noopener noreferrer" target="_blank">LED</a> front fog lamp is 3-5W, and the light color is orange yellow. The power of the rear fog lamp is 3-5W, and the light color is red to warn the trailing vehicle to maintain a safe distance.</p><p>(3) The LED license plate light is installed above or at the left and right sides of the rear license plate of the car to illuminate the rear license plate. The power is generally 1-2W to ensure that the words and numbers on the license plate can be clearly seen at 20m behind the pedestrian vehicle.</p><p>(4) The LED reversing light is installed at the rear of the car. When the transmission is in reverse gear, it automatically lights up and illuminates the rear side of the car. At the same time, it warns pedestrians in the rear to pay attention to safety. The power is generally 2-5W, and the light color is white.</p><p>(5) Brake lights are commonly known as "LED brake lights". Installed at the rear of the car. When the brake pedal is depressed, a strong red light is emitted to indicate braking. The power is 2-5W, the light color is red, and the display area of the lampshade is behind the position. In order to avoid the risk of collision of a large car following a car, a high-level brake light (<a href="https://www.lanxinautolight.com/product" rel="noopener noreferrer" target="_blank">LED light</a> strip) displayed in rows by light-emitting diodes can be added to the rear window of the car.</p><p>(6) LED turn signal The main turn signal is generally installed on the left and right sides of the head and tail of the car to indicate the driving trend of the vehicle. A side turn signal is installed in the middle of the car. The main turn signal power is generally 1-3W, the side turn signal is 2W, and the light color is stray color. When turning, the light flashes, the frequency is specified as 1.sic.5HZ, and the starting time is not more than 1.5s. When the emergency distress situation requires other vehicles to pay attention to avoidance, all the turn signals can be turned on and flashed through the hazard warning light switch.</p><p>(7) LED position lights, also known as "indicating width lights" and "position lights", are installed at the front, back and sides of the car. When the headlights are connected at night, the position lights, instrument lights and license plate lights are illuminated at the same time. To mark the shape and position of the vehicle. The power is generally 0.5W-2W. The front position light is commonly called "small light", the light color is white or yellow, the rear position light is commonly called "tail light", the light color is red; the side light color is amber.</p><p>(
LED marker lights are commonly known as "corner lights". Vehicles with an unloaded vehicle height of more than 3m should be equipped with marker lights to indicate the outline of the vehicle. The outline lamp power is generally 3W.</p><p>(9) The parking lights are installed on both sides of the front and rear of the car. The light signal must be confirmed from the distance of 150m from the front and rear of the car. The light color of the front of the car is white and the rear of the car is red. When parking at night, turn on the parking lights to mark the shape of the vehicle.</p><p>(10) The warning light is generally installed on the top of the car to mark the special type of the vehicle, and the power is generally 5-10W. Fire trucks and police cars are red, ambulances are blue, and the rotation speed is 2 to 6 times per second; buses and taxis are white and yellow. The indicator light of the empty taxi is installed on the instrument panel, the power is 3-6W, and the light color is red background and white text.</p><p>(11) The LED daytime running light is a daytime running light installed at the front of the body, which is a lamp that makes the vehicle more easily recognized by people during daytime driving. Its function is not to enable the driver to see the road, but to let others know that a car is coming. Therefore, this lamp is not a lighting lamp, but a signal lamp. Of course, the addition of daytime running lights can make the car look cooler and more dazzling, but the biggest effect of daytime running lights is not to be beautiful, but to provide the recognition of the vehicle. Before 2011, European motor vehicle daytime running lights were mandatory, and <a href="https://www.lanxinautolight.com/product" rel="noopener noreferrer" target="_blank">LED</a>s will be more widely used in automobiles.</p><p><br></p>
LED marker lights are commonly known as "corner lights". Vehicles with an unloaded vehicle height of more than 3m should be equipped with marker lights to indicate the outline of the vehicle. The outline lamp power is generally 3W.</p><p>(9) The parking lights are installed on both sides of the front and rear of the car. The light signal must be confirmed from the distance of 150m from the front and rear of the car. The light color of the front of the car is white and the rear of the car is red. When parking at night, turn on the parking lights to mark the shape of the vehicle.</p><p>(10) The warning light is generally installed on the top of the car to mark the special type of the vehicle, and the power is generally 5-10W. Fire trucks and police cars are red, ambulances are blue, and the rotation speed is 2 to 6 times per second; buses and taxis are white and yellow. The indicator light of the empty taxi is installed on the instrument panel, the power is 3-6W, and the light color is red background and white text.</p><p>(11) The LED daytime running light is a daytime running light installed at the front of the body, which is a lamp that makes the vehicle more easily recognized by people during daytime driving. Its function is not to enable the driver to see the road, but to let others know that a car is coming. Therefore, this lamp is not a lighting lamp, but a signal lamp. Of course, the addition of daytime running lights can make the car look cooler and more dazzling, but the biggest effect of daytime running lights is not to be beautiful, but to provide the recognition of the vehicle. Before 2011, European motor vehicle daytime running lights were mandatory, and <a href="https://www.lanxinautolight.com/product" rel="noopener noreferrer" target="_blank">LED</a>s will be more widely used in automobiles.</p><p><br></p>