What to do if the stand up pouch is leaking

<p><a href="https://www.nxpack.com/stand-up-pouch" rel="noopener noreferrer" target="_blank">Stand up pouchs</a> are still favored by many food manufacturers in the market. Whether it is dried fruits, nuts or other puffed food, they will choose stand up pouchs. The main values of stand up pouchs are relatively balanced, and the display effect on the shelves is very obvious. . The use requirements are not as strict as high-temperature cooking bags and vacuum packaging bags, only a certain degree of air tightness and moisture resistance can be required. However, it will inevitably occur during the use process. Leakage of the bag is caused by leaks, which leads to poor product quality and affects the user experience. The following describes how to accurately determine the air-tightness of self-supporting packaging bags.</p><p><br></p><p>First, the sealing problem</p><p>There are three factors that affect the sealing of the packaging bag: sealing knife pressure, temperature, and time. The packaging bag is reserved at the factory for filling and sealing. When the sealing pressure is unchanged, the temperature is too low or too high, which will cause the sealing of the packaging bag to be unstable and cause air leakage. At the same temperature, the length of heat-sealing time will also affect the firmness of the seal. Under normal circumstances, the value recommended by the hot air blower manufacturer is sufficient, unless the bag is thinner or thicker, which requires adjusting the parameters of the heat sealer.</p><p><br></p><p>Second, the problem of manufacturers of prefabricated bags</p><p>There are two problems for prefabricated bag manufacturers: composite strength and handling of zippers. The composite strength of the packaging bag is relatively low, which can easily cause the layer of the bag to affect the air tightness of the entire packaging bag. In addition, the zipper on the packaging bag will be much thicker than the heat seal of the other parts. If the pressure of the sealing knife is not enough, the sealing edge is not sealed, and the bag is easy to leak air.</p><p><br></p><p>If it is the second problem, you must contact the packaging bag manufacturer to negotiate. In order to avoid the problems of the bag products in the early stage, it is recommended to find more experienced bag manufacturers.</p><p><br></p>