Home
<p><span style="color: rgb(51, 51, 51);">The core part of the automatic polishing machine is its motor. Once the motor is overheated, it will directly affect the working state of the equipment. If it is serious, it may burn out the motor and cause huge losses. </span></p><p><br></p><p><span style="color: rgb(51, 51, 51);">In the process of daily use of </span><a href="https://www.polishingequipments.com/" rel="noopener noreferrer" target="_blank" style="color: rgb(51, 51, 51);">automatic polishing machine</a><span style="color: rgb(51, 51, 51);">, what are the main reasons for the motor to 'have a high fever? Let's take a look at it together: </span></p><p><br></p><p><span style="color: rgb(51, 51, 51);">1. The situation of overload operation is generally that there is no feeling when it is first used. After a period of use, the temperature rises sharply. This situation is generally due to lack of power supply voltage or overload operation of equipment. For example, a small round pipe polishing machine, polishing a long steel pipe, and the bracket does not have a guide wheel, so that when polishing, the transportation resistance of the steel pipe will be very large, adding the running load of the motor, if you don't use it for a long time, you will feel that the motor is very difficult. </span></p><p><br></p><p><span style="color: rgb(51, 51, 51);">2, the motor heat dissipation is poor, this situation is generally presented in a small processing plant, because the production task is serious. The equipment is rarely cleaned and maintained. Causes the motor vent to cover up a lot of dust. Its heat dissipation is greatly reduced. There will be overheating of the motor. Therefore, it is necessary to clean and maintain multiple motors frequently. </span></p><p><br></p><p><span style="color: rgb(51, 51, 51);">What causes the automatic polishing machine motor to have a high fever? Proper use of polishing machine can improve polishing efficiency. So how do we use the automatic polishing machine correctly? </span></p><p><br></p><p><span style="color: rgb(51, 51, 51);">1, automatic polishing machine polishing, grinding and polishing disc samples should be parallel and gently pressed on the polishing disc, pay attention to prevent the sample from flying out, because the new Mark causes pressure. At the same time, the sample should rotate and move back and forth along the rotation radius to avoid excessive wear of polished fabrics. </span></p><p><br></p><p><span style="color: rgb(51, 51, 51);">2, polishing time should eliminate scratches longer than the required time, because the deformation layer is removed at the same time. </span></p><p><br></p><p><span style="color: rgb(51, 51, 51);">3. Maintain proper humidity. Humidity will wear and reduce polishing, humidity is too small, friction heat will reduce sample temperature, lubrication, surface gloss, and even light alloy reverse wound. </span></p><p><br></p><p><span style="color: rgb(51, 51, 51);">4, in order to achieve the purpose of rough throwing, the rotating speed of the turntable is required to be low, not more than 500r/min. Mastering the correct method of using automatic polishing machine can improve polishing efficiency, thus saving costs and improving enterprise efficiency. The above is the main reason for the overheating of the automatic polishing machine motor and the corresponding solutions. If you want to know more about the polishing machine, please pay attention to Yatai official website! </span></p>
products
