Notes for installation of LED panel lights

<p><a href="https://www.dolight-led.com/led-panel-lights" rel="noopener noreferrer" target="_blank">LED panel lights</a> are high-grade indoor lighting fixture, its outer frame is made of aluminum alloy by anodic oxidation, the light source is LED, the whole lamp design is beautiful and concise, atmospheric luxury, and a good lighting effect, and can bring people do not have to enjoy.</p><p>&nbsp;</p><p>LED panel lights the light through the high transmittance of the light guide plate after the formation of a uniform planar luminous effect, good uniformity of illumination, soft light, comfortable and bright, but also want to relieve eye fatigue.</p><p>&nbsp;</p><p>LED panel lights are suitable for: ceiling (instead of the original grille lights), walls (not only for lighting purposes, but also for artistic expression), mounting body (for practical and artistic combination, convenient and simple installation), others (can also be installed at counters, etc.)</p><p>&nbsp;</p><p>LED panel lights installation notes:</p><p>1. The installation of the product must be a licensed professional electrician.</p><p>2. Check the integrity of the product when taking it out of the packing box.</p><p>3. The distance between the product and flammable materials should be at least 0.2m, and the connection between low-voltage electricity and high-voltage electricity should be separated.</p><p>4. The connection at the back of the lamp can be fixed with a wire clip, which should be fixed firmly.</p><p>5. Make sure the power cord of the lamp is of sufficient length and not subject to tension or tangential force. When installing the connection of lamps and lanterns, avoid excessive tension, do not make the connection knot. The output line should be distinguished, not confused with other lamps.</p><p>6. After installation, connect the input end of the lamp with the output end of the switching power supply.</p><p>7. Connect the input end of switching power supply of the lamp with the mains power, usually the brown line is the fire line, and the blue line is the zero line.</p><p>8. LED drive for lamps, do not mix with other lamps.</p>