Common mechanical seals for separating temperature medium pumps

<p>Common <a href="https://www.lepuseal.com/products-1" target="_blank">mechanical seal</a>s for separating temperature medium pumps</p><p><br></p><p>More common<a href="https://www.lepuseal.com/products-1" rel="noopener noreferrer" target="_blank"> <strong>mechanical seals</strong> </a>for separating temperature medium pumps:</p><p>⑴Hot water pump</p><p>Mechanical seal for recycling hot water pump of waste heat boiler. The characteristics of this kind of mechanical seal are: the moving and static ring seats are made of titanium, and its extension coefficient is small, which is similar to the carbonized prayer, and it is easy to fix the moving and static rings; it helps to seal and adopt the PTFE V-shaped sealing ring to ensure the tube. Followability of dynamic and static rings at working temperature; adopts self-washing and sends out high-pressure liquid to the shaft seal box for washing by self-washing. The cooling pressure liquid is sent to the shaft seal box for washing. The structure is simple. Within the limits, the problem of high temperature helping sealing is solved. Among them, the heat transfer area of the cooler is 1 square meter, the tube length is 23.3m, the cycle water volume is 6L/min, and the cooling water volume is 60L/min.</p><p><br></p><p>⑵High temperature oil pump mechanical seal</p><p>In petrochemical and oil refining plants, hot oil pumps with higher temperatures are used at the bottom of the tower, heat carrier pumps, slurry pumps, residual oil pumps, wax oil pumps, asphalt pumps, molten sulfur and plasticizer pumps.</p>