Home
<p><a href="https://www.jiataibaoshelf.com/cantilever-racks" rel="noopener noreferrer" target="_blank">Industrial cantilever racks</a> are mainly suitable for long goods or circular items and items with irregular sizes, such as wood, pipes, profiles, cables and so on. For these special items that are bulky, scattered and difficult to manage, cantilever racks are one of the ideal solutions. Next, Jiataibao will explain the structure of cantilever shelves and purchasing skills.</p><p><br></p><p>The cantilever rack can be either single-sided or double-sided. The structure of the cantilever rack is stable and strong, with good load capacity and high space utilization.</p><p>The column and base of the cantilever rack generally adopt C-shaped steel or H-shaped steel and cold-rolled steel according to the load-bearing requirements, and even the rack column can be used as a column in the form of a column.</p><p>The bottom of the cantilever rack is fixed under the column. If the load is large, a triangular reinforcement plate can be added for reinforcement.</p><p>The two ends of the base of the cantilever rack have sealing plates and a reinforced version on the side to strengthen the load, so that the cantilever rack is more stable when carrying goods.</p><p>In this regard, you must pay attention to the above details and the materials of the cantilever shelf when purchasing, so as to avoid the structure or material asymmetry, causing the cantilever shelf to tilt and collapse when placing goods.</p><p><br></p><p>In addition, the load-bearing capacity of the cantilever rack is on the cantilever. In order to prevent the cantilever from being bent by the items during the load, the end of the cantilever is generally tilted up a bit.</p><p>The range is between 2 degrees and 4 degrees. Excessive placement of items is obstructive, but too flat will not work. Such an angle is the most ideal state.</p><p>When purchasing, you must pay attention to the above details and the materials used for the cantilever of the cantilever shelf to avoid asymmetric structure or material, which may cause the cantilever to tilt and break when placing goods.</p><p><br></p><p>Since the cantilever rack has not only columns, but also the main components of the base and the cantilever must have reinforcement components pull rods.</p><p>It is recommended that companies pay attention to the purchase of cantilever racks: tie rods generally use C-shaped steel, angle steel and square pipes plus turnbuckle screws to pull and support between two cantilever columns.</p><p>In this way, the overall stability of the cantilever rack is higher, the carrying capacity is more stable, and the safety factor is greater.</p><p><br></p><p>Finally, the goods on the cantilever rack are generally accessed by forklifts or manually. When buying a cantilever rack cantilever, you must pay attention: the height of the cantilever rack column is usually between 1.56 meters, the cantilever length is within 1.5 meters, and the load of each arm is usually within 1000KG.</p><p>Cantilever shelves are mostly used in machinery manufacturing industry, building materials supermarkets, cable power, production factories, various industrial warehouses, etc.</p><p>After the cantilever racks are added with laminates, they are especially suitable for warehouses with small space and low height. They are easy to manage and have a wide view. Compared with ordinary laminate racks, they have higher utilization.</p>
products
