How to choose ceramic tiles for house decoration?

<p>When decorating a house, <a href="https://www.longfavor.com/ceramic-tile" target="_blank">ceramic tile</a>s are indispensable. There are many types of ceramic tiles, so how do we choose ceramic tiles?</p><p>1. Look at the corners of the ceramic tiles</p><p>In the case of <a href="https://www.longfavor.com/ceramic-tile" rel="noopener noreferrer" target="_blank"><strong>ceramic tiles</strong></a>, we can superimpose the two ceramic tiles aligned at one end, check whether the corners are neat, the error value is within the specified standard value, and we can also use a ruler to adjust the length of the diagonal of the tile Compare and see if they are the same.</p><p>2. Observe the ceramic tile surface</p><p>The gloss of the ceramic tile surface is particularly critical. This can be seen as the pros and cons of the ceramic tiles facing the light and the degree of reflection. You can also see the quality of ceramic tile products. Of course, there are also chromatic aberrations, deformations, and corners, and the flatness of the ceramic tiles is also critical.</p><p>3. Listen to ceramic tiles</p><p>Good ceramic tiles on the market will make a clear sound when tapped, this is because the hardness of the ceramic tiles is good. Conversely, if you do not hear a clear sound when tapping the ceramic tile, it means that the tile does not meet the standard when calcining, so it is best to choose carefully.</p><p>4. See the water absorption rate of ceramic tiles</p><p>Water absorption is also a key factor in distinguishing the quality of ceramic tiles. Because the lower the water absorption rate, the stronger the watch can be, and it can also reduce certain hollowing phenomenon. It is best to choose a small cup of water on the reverse side of the ceramic tiles when choosing, and observe how they absorb water. If the water is not fast, it means that the water absorption rate is high. This type of ceramic tile is prone to cracking and damage during the later stage of laying.</p><p>5. See the cleanliness of the ceramic tiles</p><p>When it comes to the cleanliness of ceramic tiles, I believe you may feel some strangeness. In fact, the cleanliness of ceramic tiles directly affects the later cleaning problems. When choosing, we can use a large pen to paint a few strokes on the surface of the floor ceramic tiles. Take a look at the fluency, whether there will be intermittent phenomenon, wait a few minutes and then wipe it with a wet towel, can you wipe clean immediately, etc.</p><p>6. Wear resistance coefficient of ceramic tiles</p><p>Wear resistance is also one of the key parameters of ceramic tiles. It is generally divided into 5 degrees, from low to high. Five degrees is the most wear-resistant for some large construction sites. For home improvement, the wear resistance coefficient is 1-4. Degree is enough.</p><p>7. Pay attention to the color difference, pay attention to the after-sales treaty</p><p>There are many types of ceramic tiles on the market, and there is a big difference between the prices. It is best that you don’t blindly want to be cheap when choosing. It is best to choose some brands of ceramic tiles, so that they are very good in terms of quality and after-sales. Good guarantee.</p>