<p>There are many interfaces for <a href="https://www.genyulcm.com/products" rel="noopener noreferrer" target="_blank">lcd modules</a>, and the classification is very fine. Mainly look at the drive mode and control mode of the lcd module.</p><p><br></p><p>The interface method of lcd module is generally divided into conductive adhesive strip crimping type, metal pin type, zebra paper crimping type. The metal pin type means that the lead wire of the lcd module is a metal pin. In use, the metal pin of the lcd module is welded to the circuit board; the conductive adhesive strip crimping refers to the lead out of the lcd module The feet are made of ITO glass. When using it, a conductive adhesive strip is needed to connect the lead glass of the lcd module and the circuit board with external structural pressure. Zebra paper crimping means that the leading line of the lcd module is zebra paper. When using it, you need to use a hot press to press the zebra paper onto the circuit board.</p><p><br></p><p>The interface form of lcd module can be generally divided into pin-type, jack-type, Cable interface and so on. The jack type means that the interface of the module is a row of jacks, and the user only needs to weld the pins to the jack when using it; the pin type means that the interface of the module is a row of pins, and the user will use the pins It can be soldered to the circuit board; the cable interface means that the interface of the module is a cable, and the user can plug or solder the cable to the circuit board.</p>
products